Building a Raspberry Pi Robot Arm with .NET 5 , Blazor and SignalR

In this talk I take you through everything you need to build a robot arm with a Raspberry Pi, .NET 5 a Blazor App and SignalR.

We begin by talking about .NET 5 and seeing how easy it is to install .NET 5.

Then we look through the various circuits and spin up a console application to explore how we can control the GPIO on the Pi.

We then see how the Servos are wired up and get the code in place to start moving our Raspberry pi based Robot Arm.

Next we’ll look at a simple Blazor and SignalR app to control our robot remotely!

Finally we’ll have a look at how we can use an Oculus Quest 2 to interact with our Robot Arm in VR!

This talk appeals to all knowledge levels and anyone interested in getting into STEM, Electronics and Robotics.

Where has this talk been given?

Example Video